No Test Module is required, if the MTTplus platform is to be dedicated to GNSS Antenna Installation & Coverage Verification. This helps keep the total cost low. However, SkyView is also available when test modules are installed.
The SkyView™ GNSS Antenna Installation & Coverage Verification functionality is part of the MTTplus Platform (chassis), so no test module is required for it to operate. A "blank" protective module is recommended to fill the module bay and protect the connectors.
Here is the minimum recommended configuration:
| Part Number | Description | |
| Z07-88-035P | MTTplus Smart Productivity Test Platform (includes carrying case and universal AC/DC adapter. AC plug must be specified) | |
| 499-05-810 |
GNSS SkyView. Satellite Coverage Map for validation of GNSS antenna installations |
|
| Z88-00-010P | High Precision Multi-band GNSS Receiver Module, for 5G timing applications. 184-channel receiver supporting GPS L1C/A & L2C, GLONASS L1OF & L2OF, Galileo E1B/C & E5b, BeiDou B1I & B2I. (Includes 499-05-031 GPS/GNSS Software Option. Multi-band antenna not included.) | |
| Z07-22-183P | MTTplus Protective Module Bay Cover (Not needed if a test module is ordered) |
Note: The test set's antenna input is an SMA (female) connector. Connector adapter cables for SMA (male) to type N, TNC, BNC or SMA (female or male) are not included and must be sourced locally.
Related Test Solutions
For more information about SkyView, visit our Knowledge Base page.