How to use the MPA-HD On-Screen Display (OSD) to View and Edit IP Address settings
SCM-HD-410 On-Screen Display (OSD)
SCM-HD-410 On-Screen Display Info:
- In addition using the USB thumb drive file, and the WebUI’s network settings screen, the MPA-HD’s IP Address can also be configured using the SCM-HD-410’s On-Screen Display and 5-way joystick.
- The SCM-HD-410’s OLED screen, commonly referred to as the On-Screen Display or OSD for short, supports four modes of operation.
- Boot Mode: The VeEX logo
is displayed while the MPA-HD is booting. - Screen Saver Mode: Every 10 seconds the OSD switches between displaying the IP Address and the Feature Set version, and every 60 seconds OSD switches between a black background with white text and a white background with black text.
- View Only Mode: Users can scroll up and down through all of currently configured the IP Address settings.
- Edit Mode: Users change the IP Address for DHCP mode, enter Static IP Address values, or Restore the IP Address to factory Default Settings.
- Boot Mode: The VeEX logo
- The OSD’s 5-way joystick
can be used to cycle through the IP Address settings, in either View Only mode or in Edit mode.
- The OSD five-way joystick buttons are polled every quarter second, meaning a quick press and release (< 0.25s) might not be registered.
- Short Press: For Short Presses, push the joystick button in for roughly 0.25 to 0.5 seconds to ensure the short press is registered.
- Long Press: For Long Presses, push on the joystick button in for roughly 5 to 6 seconds to ensure the long press is registered.
- To enter Edit mode, long press on the OSD joystick inward for 5 to 6 seconds.
- When in Edit mode, there is a 2-minute timeout where if no joystick interaction has occurred for 2 minutes, then the display switches back to Screen Saver mode and any changes will reset back to their previously saved values.
OSD View Only Mode:
How to view the MPA-HD IP Address settings:
-
Make sure the MPA-HD system is fully booted, and the Ready LED is illuminated.
- Press the five-way OSD joystick upward or downward to cycle through the following menu options.
%20inv.bmp)
.png?width=30&height=30&name=OSD%20Joystick%20(up-down).png){kind=small}
%20inv.bmp)
%20inv.bmp)
%20inv.bmp)
%20inv.bmp)
%20inv.bmp)
OSD Edit Mode:
How to edit the MPA-HD IP Address settings:
Long press on the OSD joystick inward for 5 to 6 seconds to enter Edit mode. Once in Edit mode, a long press inward initiates the following actions when used on the following screens:
- Instantly jumps to the SAVE/REBOOT screen from any of the other editable screens.
- Saves changes and automatically reboots the system when (YES) is selected on the SAVE/REBOOT screen.
- Discards changes and exits Edit mode when (NO) is selected on the SAVE/REBOOT screen.
- Restores the default IP settings and reboots when (YES) is selected on the DEFAULT SETTINGS screen.
For DHCP IP Address:
.png?width=30&height=30&name=OSD%20Joystick%20(left).png){kind=small}
%20inv.bmp)
.png?width=30&height=30&name=OSD%20Joystick%20(in).png){kind=small}
%20inv.bmp)
%20inv.bmp)
For Static IP Address:
%20inv.bmp)
.png?width=30&height=30&name=OSD%20Joystick%20(up-down-left-right).png){kind=small}
Restore IP Address to Default Settings:
%20inv.bmp)
%20inv.bmp)