Can Existing VeEX Instruments be Retrofitted with the Optical Connector Protector System?
Most VeEX optical test sets, with physical contact test ports, can be retrofitted with the Optical Connector Protector options, to take advantage of the Field Replaceable Ferrule.
Yes, many VeEX fiber optics test sets, with physical contact test ports, can be retrofitted with the Optical Connector Protector options, to take advantage of the Field Replaceable Ferrule system. Refer to the Related Test Solutions section for the list of supported meters.

One of the key design features of the Optical Connector Protector's patent pending design is that it uses standard panel mount holes, hence replacing the connector base is fairly simple, so there is no need to buy a brand-new test set to take advantage of its cost and time saving benefits. However, this procedure must be performed at an authorized service center.
If a test set needs to be sent to a service center for optical connector repairs and/or recalibration, it is worth considering performing the upgrade to the Optical Connector Protector option at that moment. It will save you money. However, such upgrade may not make sense for certain simpler low-cost meters, such as power meters, since the total cost of involved parts, labor and shipping could justify replacing them with brand-new meters instead.
The cost of the upgrade varies depending on the type of test set, its configuration and current condition, due to the number of ports involved and whether recalibration is required or not.
Please contact our local Sales, Representative, Authorized Distributor, or use the Contact Us page to request more information and quote. Include the serial number(s) as a reference, so we can provide a more complete answer.
Refer to the Optical Connector Protector article for further details about this replaceable ferrule solution.
Related Test Solutions
The following VeEX instruments can support the Field-Replaceable Optical Connector Protector option:
- Optical Connector Protector web page
- FL41 - Optical Fault Locator
- FL150 - FaultScout® Fiber Optics Fault Locator
- FX41xT - Selective PON Optical Power Meter (OPM) for G-PON and XGS-PON
- FX84 - Optical Loss Test Set (OLTS)
- FX92 - DWDM (C-band) Optical Channel Checker
- FX120 Series - PON Analyzers & Multi-Gig Service Test Sets
- FX150+ - Mini OTDR for Point-to-Point and FTTx/PON Applications
- FX160 - FiberBEAST™ Bidirectional OLTS & OTDR
- FX180X - CWDM optical Channel Checker (OCC)
- FX182 - xWDM optical Channel Checker (OCC)
- MTTplus-410+ - OTDR & Fiber Optics Test Module
- OPX-BOXe - Mini OTDR
- PX90 - PON Service Installation Meter
- PX92 Series - PON Analyzers & Multi-Gig Service Test Sets
- RXT-4100+ - OTDR & Fiber Optics Test Module
- RXT-4113+ - xWDM Tunable OTDR Module
- RXT-4500/4510 - Optical Spectrum Analysis (OSA) Modules